PFAFF GRAND PIPING FOOT FOR IDT SYSTEM (G,J,K*,L) - 7393033066932
Skip Navigation Website Accessibility
Hours: Mon-Sat 9a - 5p  *Closed Sunday
 


PFAFF GRAND PIPING FOOT FOR IDT SYSTEM (G,J,K*,L)

SKU# 7393033066932
PART # 820977096

PFAFF GRAND PIPING FOOT FOR IDT SYSTEM (G,J,K*,L) K* except SMARTER BY PFAFF™

260c, 160s, 140s

The Grand Piping Foot is perfect for inserting thick home dec piping
into seams or wherever you’d like to add a finishing touch! The Grand
Piping Foot is used to cover large cords with fabric for specialty piping
and insert the piping into seams or edges for a tailored finish. The
trim is sewn between the two layers of fabric in one step. You can also
create your own piping for a custom finish. This foot can be snapped
onto the right or the left of the needle which makes it possible to both
create and sew the piping into the seam and to beautifully topstitch
along with the piping.
To make piping from your fabric:
1. Snap on the Grand Piping Foot to the right side of the needle.
2. Engage the IDT™ system.
3. Cut fabric strips on the bias or crosswise grain, wide enough to cover the cording plus seam
allowances.
4. Lay the cording on the wrong side of the fabric strip and wrap the fabric over the cord.
5. Place the fabric and cord under the Grand Piping Foot with the cord to the left of the foot.
6. Select a straight stitch, 2.5 mm stitch length. Move the needle position to the left. Sew.
7. Use your new piping in projects following the steps above.
TIP: When you sew this piping into a project, adjust the needle position so it stitches one
setting closer to the cord, to hide the fi rst stitching.
To stitch piping into a seam:
1. Snap on the Grand Piping Foot to the right side of the needle.
2. Engage the IDT™ system.
3. Select a straight stitch, length 2.5.
4. Place the piping on the right side of the fabric, matching raw edges. Position under the foot with
the piping to the left of the foot.
5. Add a second piece of fabric on top so the right sides are together and piping sandwiched
between the layers.
6. Position under the Grand Piping Foot with the piping to the left of the foot.
7. Sew.
Tip: Clip the seam allowance around curves and at corners to reduce bulk and allow the
seams to lay flat.
Topstitching:
1. Snap the Grand Piping Foot to the left side of the needle.
2. Engage the IDT™ system.
3. Open the seam and fold so the piping is along the fabric edge. Press.
4. Sew a row of topstitching to the left of the seam line.

Contact Us

  • Phone: (508) 255-0653
  • 11 Route 28, Orleans MA. 02653
  • Shop Hours:
  • Monday - Saturday: 9:00a - 5:00p,
  • * Closed Sundays