QUILTERS SELECT PRINT & PIECE FUSE LITE 25 SHEETS 8.5"x11"

Ideal for turned edge applique! This fiber-based foundation gives solid yet soft support for detailed or heavy stitching and the temporary fuse keeps fabrics from shifting or pulling. The fibers of Select Print & Piece Fuse Lite are partially water-soluble; simply dampen the stitching lines and the foundation is removed easily without distorting stitches!

Directions for Use and Care

Directions for general use as a stabilizer for embellishment:

• Directions for general sse as a stabilizer for embellishment

• Position the fusible side of Print & Piece Fuse Lite over the wrong side of the fabric.

• Cover the stabilizer with a cotton pressing cloth or piece of muslin. It is also OK to press from the fabric side instead of the stabilizer side.*

• Press with the iron with an up-and-down motion, not side-to-side. If a bond is not achieved, slightly increase your iron temperature and try again.**

• Once stitching is complete, slightly dampen the stitching line and pull away the stabilizer.

*Remember that all irons heat differently. We recommend testing on scrap fabric before beginning your project.

**The fusible coating on the stabilizer was designed to be temporary. If the iron temperature used is too hot, the bond may become permanent.